RP-SMA Bulkhead Connector with O-Ring | RG8 LMR400 Belden 9913

Click image to zoom

Model CN4RSJBO is a reverse polarity SMA (RP-SMA) jack or female bulkhead with O-Ring crimp style connector for AIR802® CA400, Times Microwave's LMR400® and similar size 50 ohm cables.

AIR802® manufactures high precision and performance connectors. Connector selection is extremely important to insure proper operation and reliability. Poorly constructed connectors will cause higher VSWR and insertion loss resulting in electrical noise and intermittent issues. AIR802® manufactures very large quantities of connectors for our global customers allowing us to provide an attractive quality to price ratio.

In choosing connectors, it is important to match one to the type of cable being used, the impedance (50 versus 75 ohms), the frequency support, insertion loss, voltage rating and environmental specifications. If you are an amateur considering buying connectors to install, we recommend that you purchase our pre-manufactured antenna cable assemblies which have been professionally assembled and tested. Installation of connectors without experience and proper equipment will lead to improperly terminated connectors.

This connector is RP-SMA jack (female) bulkhead with O-Ring for RG8 and 400-Series type cables. Connectors can be a bit confusing regarding the gender. There are Reverse Polarity (RP) SMA and regular SMA connectors. RP-SMA is common with many wireless products. The RP-SMA jack is a female connector. It has threads on the outside and the pin protrudes from inside the connector. This causes confusion for many not familiar with various connector types leading them to believe that this is the male, however it is without doubt the female. We generally prefer the term, jack, in order to avoid this confusion.

Specifications

ELECTRICAL
Impedance	50 ohms
Frequency Range	DC ~ 11 GHz
Voltage Rating	500 Volts Peak
Dielectric Withstanding Voltage	1000 Volts RMS
Insertion Loss	.20 dB Max.
MATERIAL
Body	Nickel Plated Brass
Contact	Gold Plated Brass
Insulator	TFE
Ferrule	Nickel Plated Brass
MECHANICAL
Cable Attachment	Hex Braid Crimp
Center Conductor Attachment	Crimp or Solder
Cable Retention	60 lbs. Pull
Mating	1/4 - 36 UNEF Threading
Mating Torque	15 inch pounds Maximum
ENVIRONMENTAL
Temperature	-67°F to 185°F (-55°C to 85° C)
Weatherproof	RP-SMA Type Connectors are Weatherproof by Design
RoHS Compliant	Yes
Corrosion	MIL-Std. 202 Method 101 (Test Condition B)
Temperature Cycling	MIL-Std. 202 Method 102 (Test Condition C)
Altitude	MIL-Std. 202 Method 105 (Test Condition C)
Vibration	MIL-Std. 202 Method 204 (Test Condition D)
Moisture Resistance	MIL-Std. 202 Method 106 (Test Condition B)