97% beoordeelt onze winkel als UITSTEKEND
AIR802® manufactures high precision and performance connectors. Connector selection is extremely important to insure proper operation and reliability. Poorly constructed connectors will cause higher VSWR and insertion loss resulting in electrical noise and intermittent issues. AIR802® manufactures very large quantities of connectors for our global customers allowing us to provide an attractive quality to price ratio.
In choosing connectors, it is important to match one to the type of cable being used, the impedance (50 versus 75 ohms), the frequency support, insertion loss, voltage rating and environmental specifications. If you are an amateur considering buying connectors to install, we recommend that you purchase our pre-manufactured antenna cable assemblies which have been professionally assembled and tested. Installation of connectors without experience and proper equipment will lead to improperly terminated connectors.
This connector is RP-SMA jack for RG8 and 400-Series type cables. Connectors can be a bit confusing regarding the gender. There are also Reverse Polarity (RP) SMA and regular SMA connectors. RP-SMA is common with many wireless products. The RP-SMA jack is a female connector. It has threads on the outside and the pin protrudes from inside the connector. This causes confusion for many not familiar with various connector types leading them to believe that this is the male, however it is without doubt the female. We generally prefer the term, jack, in order to avoid this confusion.
Specificaties
| ELECTRICAL | |
| Impedantie | 50 ohms |
| Frequency Range | DC ~ 11 GHz |
| Voltage Rating | 500 Volts Peak |
| Dielectric Withstanding Voltage | 1000 Volts RMS |
| Insertion Loss | .20 dB Max. |
| MATERIAL | |
| Body | Nickel Plated Brass |
| Contact | Gold Plated Brass |
| Insulator | TFE |
| Ferrule | Nickel Plated Brass |
| MECHANICAL | |
| Cable Attachment | Hex Braid Crimp |
| Center Conductor Attachment | Crimp or Solder |
| Cable Retention | 60 lbs. Pull |
| Mating | 1/4 – 36 UNEF Threading |
| Mating Torque | 15 inch pounds Maximum |
| ENVIRONMENTAL | |
| Temperature | -67°F to 185°F (-55°C to 85° C) |
| Weatherproof | RP-SMA Type Connectors are Weatherproof by Design |
| RoHS-conform | Ja |
| Corrosion | MIL-Std. 202 Method 101 (Test Condition B) |
| Temperature Cycling | MIL-Std. 202 Method 102 (Test Condition C) |
| Altitude | MIL-Std. 202 Method 105 (Test Condition C) |
| Vibration | MIL-Std. 202 Method 204 (Test Condition D) |
| Moisture Resistance | MIL-Std. 202 Method 106 (Test Condition B) |
Download PDF Connector Drawing
Product Warranty
This connector is of absolute quality and is fully covered under by the Air802 LLC Limited Warranty.
Dutch 
English 
Spanish 
French 
Italian 
German 
Portuguese 
Korean 
Arabic
Beoordelingen