Model CN3RSJ is a reverse polarity SMA (RP-SMA) jack or female crimp connector sized to fit AIR802® CA240, Times Microwave LMR240®, RG8X, Belden 9258 and equivalent size 50 ohm cables. This connector consists of three parts, the body, ferrule and pin.
SMA are sub-miniature type connectors with screw style coupling. There are both SMA and RP-SMA type connectors. It is quite common for these to be confused. The SMA female has a center receptacle. However the RP-SMA female has a center pin protruding thus causing those unfamiliar to be confused. We often use the terms plug for male and jack for female since plug and jack tend to lead to less confusion. SMA connectors are utilized in a broad range of applications.
Specificaties
ELECTRICAL | |
Impedantie | 50 ohms |
Frequency Range | DC ~ 11 GHz |
Voltage Rating | 500 Volts Peak |
Dielectric Withstanding Voltage | 1000 Volts RMS |
Insertion Loss | .20 dB at 6 GHz Maximum |
VSWR | 1.2 |
MATERIAL | |
Body | Nickel Plated Brass |
Contact | Gold Plated Brass |
Insulator | TFE |
Ferrule | Nickel Plated Brass |
MECHANICAL | |
Cable Attachment | Hex Braid Crimp |
Center Conductor Attachment | Solder |
Cable Retention | 40 lbs. Pull |
Mating | 1/4 – 36 UNS Threaded Coupling |
Mating Torque | 15 inch pounds Max. |
ENVIRONMENTAL | |
Temperature | -67°F to 185°F (-55°C to 85° C) |
RoHS-conform | Ja |
Corrosion | MIL-Std. 202 Method 101 (Test Condition B) |
Temperature Cycling | MIL-Std. 202 Method 102 (Test Condition C) |
Altitude | MIL-Std. 202 Method 105 (Test Condition C) |
Vibration | MIL-Std. 202 Method 204 (Test Condition D) |
Moisture Resistance | MIL-Std. 202 Method 106 (Test Condition B) |
Download PDF Connector Drawing
Product Warranty
This connector is of absolute quality and is fully covered under by the AIR802 Limited Warranty.
Beoordelingen