Reverse Polarity SMA (RP-SMA) Jack Female Bulkhead Crimp Connector with O-ring for Cable Types: AIR802 CA195, RG58/141/142, Times Microwave's LMR195, Belden 8240/8219
Reverse Polarity SMA (RP-SMA) Jack Female Bulkhead Crimp Connector with O-ring for Cable Types: AIR802 CA195, RG58/141/142, Times Microwave's LMR195, Belden 8240/8219

Beoordelingen

Enkel ingelogde klanten die dit product gekocht hebben, kunnen een beoordeling schrijven.

Reverse-Polarity SMA (RP-SMA) Plug-Male Right Angle Crimp Connector for Cable Types: AIR802® CA600, Times Microwave LMR600®, and Similar Size Cable Reverse-Polarity SMA (RP-SMA) Plug-Male Right Angle Crimp Connector for Cable Types: AIR802® CA600, Times Microwave LMR600®, and Similar Size Cable $6.85
Reverse Polarity SMA (RP-SMA) Plug-Male Right Angle Connector for RG8X, AIR802 CA240, Times Microwave LMR240, Belden 7808 and Equivalent Size Cables Reverse Polarity SMA (RP-SMA) Plug-Male Right Angle Connector for RG8X, AIR802 CA240, Times Microwave LMR240, Belden 7808 and Equivalent Size Cables $4.35

Reverse Polarity SMA (RP-SMA) Jack Female Bulkhead Crimp Connector with O-ring for Cable Types: AIR802 CA195, RG58/141/142, Times Microwave’s LMR195, Belden 8240/8219

$4.50

AIR802® model CN2RSJB is a RP-SMA jack (female) bulkhead coaxial crimp connector with an O-ring sized to fit RG58, AIR802® CA195, Times Microwave LMR195® and other 195-Series cable.

 

Garantie: 1 Jaar

  • 97% beoordeelt onze winkel als UITSTEKEND
AIR802® model CN2RSJB is a RP-SMA jack (female) bulkhead coaxial crimp connector with an O-ring sized to fit RG58, AIR802® CA195, Times Microwave LMR195® and other 195-Series cable.

 

AIR802® model CN2RSJBO is a RP-SMA jack-female coaxial crimp connector with an O-ring sized to fit RG58, AIR802® CA195, Times Microwave LMR195® and other 195-Series cable.

AIR802® manufactures high precision and performance connectors. Connector selection is extremely important to insure proper operation and reliability. Poorly constructed connectors will cause higher VSWR and insertion loss resulting in electrical noise and intermittent issues. AIR802® manufactures very large quantities of connectors for our global customers allowing us to provide an attractive quality to price ratio.

In choosing connectors, it is important to match one to the type of cable being used, the impedance (50 versus 75 ohms), the frequency support, insertion loss, voltage rating, cable size or type and environmental specifications. If you are an amateur considering buying connectors to install, we recommend that you purchase our pre-manufactured antenna cable assemblies which have been professionally assembled and tested. Installation of connectors without experience and proper equipment will lead to improperly terminated connectors.

This connector is a RP-SMA jack (female) for 195-Series cable. Connectors can be a very confusing regarding the gender. There are reverse polarity, RP-SMA and regular SMA connectors. RP-SMA is common with many wireless products. The RP-SMA jack is a female connector. The threads are on the outside and a center pin protrudes from inside the connector. This causes confusion for many not familiar with various connector types leading them to believe that this is the male, however it is the female. This is why we prefer the term plug and jack in order to avoid confusion. For further clarification see our connector identification chart in the Knowledge Center area of our web site.   

Specificaties

 

ELECTRICAL  
Impedantie 50 ohms
Frequency Range DC to 6 GHz
Voltage Rating 500 Volts Peak
Dielectric Withstanding Voltage 1000 Volts RMS
Insertion Loss

.20 dB Max.
MATERIAL  
Body Nickel Plated Brass
Nut Nickel Plated Brass
Washer Nickel Plated Brass
O-Ring Black Rubber
Pin Gold Plated Phosphorus Bronze
Insulator TFE
Ferrule Nickel Plated Brass
MECHANICAL  
Cable Attachment Hex Braid Crimp
Center Conductor Attachment Solder
Cable Retention 20 lbs. Pull
Mating 1/4 – 36 UNS
Mating Torque 15 inch pounds Maximum
ENVIRONMENTAL  
Temperature -67°F to 185°F (-55°C to 85° C)
RoHS-conform Ja
Corrosion MIL-Std. 202 Method 101 (Test Condition B)
Temperature Cycling MIL-Std. 202 Method 102 (Test Condition C)
Altitude MIL-Std. 202 Method 105 (Test Condition C)
Vibration MIL-Std. 202 Method 204 (Test Condition D)
Moisture Resistance MIL-Std. 202 Method 106 (Test Condition B)

 

 

Download PDF Connector Drawing

 

 

Aanvullende informatie

Gewicht 0.0181436948 kg

Beoordelingen

Enkel ingelogde klanten die dit product gekocht hebben, kunnen een beoordeling schrijven.

Gerelateerde producten